Bondtech CHT volcano nozzle brass nozzle for 3D printer exturder

Bondtech CHT volcano nozzle brass nozzle for 3D printer exturder

Bondtech CHT volcano nozzle brass nozzle for 3D printer exturder

• Bondtech CHT Volcano nozzle is a high-flow coated brass nozzle built for Volcano-style heater blocks. Designed to increase melt capacity and enable higher volumetric flow, it helps users in India print faster with thicker layers and wider lines—ideal for large parts, functional prints, and production-style throughput.
• The key performance upgrade comes from Bondtech CHT (Core Heating Technology). Inside the nozzle, the filament is split into 3 thinner strands (as stated), increasing the surface area in contact with the heated walls.
• This allows the material to melt more efficiently from within, supporting higher flow rates and faster printing at comparable temperatures (hardware/material dependent).
• Bondtech lists typical flow rate gains between 25% and 65% depending on the setup and print settings (as stated).
• This is a nickel-coated brass nozzle, combining brass’s good thermal conductivity with the benefits of a nickel surface.
• The nickel coating improves corrosion resistance and lowers friction, helping reduce plastic adhesion on the nozzle exterior and supporting smoother material flow (as stated). It also adds protection against erosion and abrasion compared to uncoated brass (as stated).
• It follows the Volcano nozzle standard (M6×1×14.5×21) (as stated) and requires a 6mm wrench for installation (as stated). It is optimized for 1.75mm filament and is compatible with 2.85mm filament systems. Size options include 0.40, 0.60, 0.80, 1.0, and 1.2mm, letting you choose between detail (0.4) and maximum throughput (0.8–1.2).

Specifications

• Product: Bondtech CHT Volcano nozzle
• Material: brass with nickel coating
• Nozzle standard: Volcano (M6×1×14.5×21) (as stated)
• Sizes: 0.40 / 0.60 / 0.80 / 1.0 / 1.2mm
• Filament: optimized for 1.75mm, compatible with 2.85mm (as stated)
• Tool: 6mm wrench (as stated)
• Flow gain: 25–65% (setup/material dependent, as stated)

Applications

• High-speed, high-flow printing with Volcano hotends
• Large parts, thick layers, and fast prototyping
• Functional parts needing strong layer bonding with wider extrusion
• Production workflows where time savings matter

Features

• CHT internal design for higher melt capacity (as stated)
• Splits filament into 3 strands for faster melting (as stated)
• Nickel-coated surface for lower friction and reduced adhesion (as stated)
• Precision machining for consistent extrusion
• Multiple nozzle sizes for throughput tuning

Package Include

• 1 pcs of Bondtech CHT Volcano Nozzle.